Roll Off Bin Sizes in Metro Vancouver

Peak Disposal offers roll-off bins from 8 to 40 yards for residential cleanouts, renovations, construction, demolition, roofing, landscaping, and commercial projects across the Lower Mainland, with established service coverage from West Vancouver to Abbotsford. Choose a bin based on your debris volume, material weight, loading method, and available placement space—or speak with dispatch for help planning the right setup.

Compare Peak Disposal Bin Sizes

Use this comparison as a starting point. The right bin depends on both the amount and type of material you are removing. Dense materials such as concrete, soil, brick, rock, masonry, and asphalt generally require smaller bins and carefully planned loads because transportation-weight limits may be reached before the container is visually full.

Size May Suit Approx. Dimensions Typical Waste Types Action
8 Yard Heavy-Material and Smaller-Volume Projects 15′ × 8′ × 2′ Approved Concrete, Soil, Brick, Rock, Masonry and Other Dense Materials Get Quote
10 Yard Smaller Renovations, Cleanouts and Approved Heavy-Material Projects 16′ × 8′ × 2.5′ Renovation Debris and Approved Dense Materials Get Quote
14 Yard Small-to-Medium Renovations and Property Projects 12′ × 8′ × 4′ Construction, Renovation and General Project Debris Get Quote
20 Yard Medium-to-Large Renovation and Construction Projects 18′ × 8′ × 4′ Construction, Renovation and Bulky Debris Get Quote
30 Yard Larger Construction, Demolition and Commercial Projects 18′ × 8′ × 6′ Higher-Volume Construction and Demolition Debris Get Quote
40 Yard High-Volume Construction, Demolition and Commercial Projects 20′ × 8′ × 8′ Bulky, High-Volume, Relatively Lighter Debris Get Quote
8 Yard 14′ × 8′ × 2′
May Suit

Heavy-Material and Smaller-Volume Projects

Typical Waste Types

Approved Concrete, Soil, Brick, Rock, Masonry and Other Dense Materials

Get Quote
10 Yard 16′ × 8′ × 2.5′
May Suit

Smaller Renovations, Cleanouts and Approved Heavy-Material Projects

Typical Waste Types

Renovation Debris and Approved Dense Materials

Get Quote
14 Yard 12′ × 8′ × 4′
May Suit

Small-to-Medium Renovations and Property Projects

Typical Waste Types

Construction, Renovation and General Project Debris

Get Quote
20 Yard 16′ × 8′ × 4′
May Suit

Medium-to-Large Renovation and Construction Projects

Typical Waste Types

Construction, Renovation and Bulky Debris

Get Quote
30 Yard 18′ × 8′ × 6′
May Suit

Larger Construction, Demolition and Commercial Projects

Typical Waste Types

Higher-Volume Construction and Demolition Debris

Get Quote
40 Yard 20′ × 8′ × 8′
May Suit

High-Volume Construction, Demolition and Commercial Projects

Typical Waste Types

Bulky, High-Volume, Relatively Lighter Debris

Get Quote

Available Roll-Off Bin Sizes

Peak Disposal offers six roll-off bin sizes for different project types, waste volumes, material weights, and site conditions. The summaries below provide a quick overview of how each size may be used before you review the full dimensions and capacity guide.

8-Yard bin

8-Yard

With its low 2-foot walls and compact footprint, the 8-yard bin may suit concrete, soil, brick, masonry, rock, asphalt, and other approved dense materials. Heavy-material loads must follow the project-specific loading instructions provided by Peak Disposal.

10-Yard

The 10-yard bin provides slightly more volume while remaining compact. It may suit smaller renovations, cleanouts, landscaping work, and approved heavy-material projects where the planned load remains suitable for safe transportation.

14-Yard

The 14-yard bin can work well for smaller-to-medium renovation, construction, and property-improvement projects. Its relatively compact footprint also makes it useful where placement space is more limited.

20-Yard

The 20-yard bin provides additional volume for renovation, construction, cleanout, and other projects generating moderate amounts of bulky debris. Material type and weight should still be considered before selecting this size.

30-Yard

The 30-yard bin is designed for larger-volume construction, demolition, renovation, and commercial waste streams. It provides substantial capacity for bulky debris but should not be selected simply to accommodate more dense material.

40-Yard

Peak Disposal’s largest roll-off option provides high-volume capacity for suitable construction, demolition, commercial, and bulky waste streams. Because volume does not determine allowable transportation weight, dense materials generally require a smaller-bin approach.

How to Choose the Right Bin Size

Start with three factors: what you are removing, how much material the project will generate, and how heavy that material is. Bulky, relatively lighter debris may require more container volume, while concrete, soil, brick, rock, masonry, asphalt, and similar dense materials can reach transportation-weight limits in much smaller quantities.

Placement space, site access, loading equipment, and the planned waste stream can also affect the appropriate setup. If you are unsure, tell Peak Disposal about your project before ordering rather than choosing a bin based on volume alone.

What Can Go in a Peak Disposal Bin?

Material acceptance depends on the waste stream, bin setup, and receiving requirements. Tell dispatch what you plan to load before delivery, particularly when the project involves heavy, regulated, unusual, or potentially hazardous material.

Materials That May Be Accepted

Depending on the planned load, materials may include:

  • household and cleanout debris;
  • construction and renovation debris;
  • wood and lumber;
  • approved roofing debris, depending on material type and receiving requirements;
  • drywall and gypsum under the applicable receiving requirements;
  • concrete and masonry where approved;
  • soil and excavated material where approved;
  • landscaping and other project debris where accepted.

Materials That Require Confirmation or Separate Handling

Do not load materials that require special handling into a standard or dedicated bin without confirming the appropriate arrangement. These may include:

  • liquids and fuels;
  • paints, solvents and chemicals;
  • hazardous materials;
  • asbestos-containing or suspected asbestos-containing material;
  • contaminated or potentially contaminated soil;
  • mixed material that could compromise a dedicated recycling or receiving stream.

Concrete, soil and other dense materials also require project-specific loading guidance even when the material itself is acceptable.

Unsure whether your material can go in the bin?

Bin Delivery Across Metro Vancouver & the Fraser Valley

Peak Disposal coordinates roll-off bin rental and hauling throughout its established service areas across Metro Vancouver and into Abbotsford.

Bin Rental Service Areas:

Delivery timing depends on bin availability, project location, site access, material requirements, and dispatch scheduling. Contact Peak Disposal to confirm availability for your project.

Visit or Contact Peak Disposal

Speak With Our Team

Our dispatch team can help you choose the right bin, review your materials, and coordinate delivery and pickup.

Address:

Suite 205, 145
Schoolhouse Street
Coquitlam, BC V3K 4X8

Phone:

Dispatch: (604) 690-7325
Office: (604) 951-1177

Working Hours:

Monday–Saturday: 7:00 AM–5:00 PM
Sunday: Closed

Serving Metro Vancouver

Based in Coquitlam, Peak Disposal provides roll-off bin rental and waste removal services across Metro Vancouver.

What Our Clients Say?

To successfully solve all the issues related to construction waste management, we have established Long-term and stable partnerships with various clients

Bin Rental Services for Different Projects

Peak Disposal provides roll-off bins for a range of residential, construction, commercial, and material-specific projects.

Residential Bin Rental

Bins for household cleanouts, renovations, property improvements, moving, and other residential projects.

Construction Bin Rental

Roll-off bins for contractors, builders, renovations, demolition work, and active construction sites.

Roofing Bin Rental

Bin rental and hauling for roofing tear-offs and other approved roofing waste streams.

Commercial Waste Bin Rental

Flexible roll-off bin options for commercial properties, facilities, project work, and higher-volume waste needs.

Concrete & Heavy-Material Disposal

Smaller-bin planning for concrete, soil, masonry, and other dense materials where transportation weight is a primary consideration.

Material-Specific Disposal

Dedicated planning for waste streams that may have particular sorting, recycling, or receiving requirements.

Frequently Asked Questions About Roll-Off Bin Sizes

What is the most common roll-off bin size?

There is no single bin size that is best for every project. The appropriate choice depends on debris volume, material weight, project type, placement space, and loading method. Peak Disposal offers six sizes from 8 to 40 yards so the container can be matched more closely to the planned waste stream.

A 10- or 14-yard bin may suit some smaller renovation projects, but the right size depends on what is being removed and how much debris the work will generate. Heavy materials require different planning from bulky renovation waste, so describe the project and materials to dispatch before choosing solely by container volume.

Do not mix concrete into a general construction load unless Peak Disposal has specifically confirmed the arrangement. Concrete is extremely dense and may require a smaller heavy-material bin, controlled loading, and a different receiving pathway. Keeping material streams separate may also improve recycling or recovery opportunities, depending on the material and receiving facility.

Explore Concrete Disposal →

Standard rental periods are typically up to 14 days unless another arrangement is agreed upon. The appropriate rental period can depend on the project and service arrangement. If you expect to need the bin longer, discuss timing with dispatch when booking or before the agreed rental period ends.

Learn About Rental Periods & Delivery Preparation →

Delivery timing depends on current bin availability, location, site access, material type, and dispatch scheduling. Contact Peak Disposal with your project details and preferred delivery date to confirm the earliest available service rather than assuming same-day availability.

Peak Disposal provides bin rental and coordinated hauling throughout its established service areas across the Lower Mainland, including Vancouver, Coquitlam, Burnaby, Richmond, Surrey, Abbotsford, Langley, Delta, New Westminster, North Vancouver, and West Vancouver.

Not Sure Which Bin Size You Need?

Tell Peak Disposal what you are removing, approximately how much material your project will generate, and where the bin will be placed. Dispatch can help you choose an appropriate bin and plan delivery and pickup.